UV ink cleaner (Gibo licensing) 



 Gibo licensing UV ink cleaner designed to use UV inks (UV inks) of the printing press cleaning. This product is composed of environmentally friendly solvents from a variety of complex, non-toxic, harmless, non-flammable, store security. On the ink rollers and machinery without any adverse impact and injury. Can effectively remove the UV curing inks. 

 Usage: 

 1, the proposed car wash before the main rollers and transfer roller separation. 

 2, the ink scraping hung up, but do not tighten the ink scraping. 

 3, start the machine to high speed, and then the ink roller back and forth from right to left spray two UV ink cleaner, the purpose is to make the combination of cleaning agents and UV inks, the process of completion of the first colostrum. Separated by about 1 minute before spraying a cleaning agent, which aims to enhance emulsification. Let the machine run for about 1 minute after the natural, the third time the two spray cleaner back and forth, the whole purpose of the original UV ink emulsion. After the machine has run for about 1 minute after the natural tightening of ink scraping. (Note: the amount of each sprinkler shall not exceed 30 ml may cause the ink roller skid. Meanwhile, the ink stick two should increase the amount of cleaning agent. Ink thicker to increase the local amount of cleaning agent should be.) 

 4, after the ink on the tight scratch the ink on the ink roller will continue to lighten, then every 30 seconds in the roller back and forth on the appropriate two UV spray ink cleaner, (AIM: residual ink emulsion), the process of around 2 - 5. Until the ink roller is cleaned. (Note: If the ink scraper stick with the Mexican population does not usually affect the poor contact between the cleaning efficiency. Proposed to use artificial mouth and the ink to the ink stick scraper good contact between the replacement plan a good ink scraping). 

 5, add a small amount of water on the ink roller. (Purpose: to be emulsified in the residual ink wash). 

 6 At a time when the ink roller is thoroughly cleaned. But failed to shut down, continue to let the machine run until the ink roller to dry on the water to shut down the original. 

 7, in the case of a good press, the use of UV ink cleaner Libang card printing machine ink roller cleaning only 4 to 6 minutes.